DMX-10 Low Cost PCIeX Interface Adapter.

DMX-10

Low Cost PCIEx I2C/SPI/GPIO Interface Adapter.

ORDER NOW

General description	SW Tools & Utilities	Downloads	Translations
Features	Documentation	Related Products	Email support
Block Diagram	Buy online	Applications	Warranty

DMX-10 low cost PCIEx Interface Adapter provides simple and versatile solution to get instant access to various parallel and serial interfaces like I2C, SPI, SMBUS and others.

Flexible multi-level I2C interface with configurable up to 2Mbps i2c bus clock (including fast mode 400 Kbps & standard mode 100 Kbps i2c bus clock rates).
Up to 10Mbps Slave and Master SPI interface with configurable phase, polarity and frequency.
General Purpose Input/Output (GPIO) pins control.
Field upgradable.
Linux/Windows/DOS/MacOS/embedded OS support.
Flexible and powerful API for custom software development without any kernel mode driver.
Wide range of I/O signal levels to suite target requirements

General Description

DMX-10 is, all-in-one ready to use PCIEx to I2C/SPI/GPIO Interface adapter based on system with FPGA and 1x PCIEx PHY. DMX-10 converts PCIEx transactions into the I2C, SPI master or slave transactions and GPIO control functions. DMX-10 turns your PC running Windows, DOS, Linux, MacOS or any embedded OS with PCI support into comprehensive general purpose bus master or slave adapter.

Features

DMX-10 I2C/SPI/GPIO Interface Adapter supports variable and configurable I2C bus speed modes.
- 2000 Mbit/s maximal supported I2C bus speed.
- 400kBit/s fast mode.
- 100kBit/s standard mode.
- Configurable I2C bus master clock speed in range of 400Kbps to 1Kbps.
Zero latency and no delay in back to back transactions.
PCIEx transactions at 2.5Gbps can be fully neglected (compared to relatively slow I2C and SPI bus frequencies) in latency and back to back bandwith calculations.
I2C bus protocol Multi Master arbitration support.
I2C Bus Clock Synchronization (Clock Stretching) support.
To communicate with relatively slow I2C slave devices, DMX-10 I2C bus master supports clock stretching.
SPI Interface Support.
- SPI Master and Slave transactions support.
- Configurable SPI bus clock polarity, phase and frequency.
Field upgradable.
DMX-10 FPGA can be uploaded with new image without removing DMX-10 board from your PC. This feature allows Dimax to make fast DMX-10 customization.
Whide range of input/output signal levels.
Flexible I2C pull-ups configuration.
- I2C pull-ups enable/disable.
- external/internal I2C bus voltage.
Compatible with PCIEx 1.0 Specification
Windows 98/2000/XP, DOS, Linux, MacOS, embedded OS Support.
Dimax API supports a number of DMX-10 devices working simultaneously.

Block Diagram

Applications

Development and Testing Equipment.
I2C EEPROM, SPI EEPROM, ICP (In-Circuit Programming) Capable Microcontroller Programmer.
Mass Production Host Systems.
PC Based Monitoring Systems.
I/O Controllers.

Support

Buy online

Product Type	Product Status	Price	Buy Now
DMX-10 PCIEx-I2C/SPI/GPIO Interface Adapter	Back Order	Contact Us	Contact Us

Warranty

The DMX-10 units are unconditionally guaranteed by Dimax. If DMX-10 has not performed to your satisfaction, you can simply return the undamaged unit within 60 days period with the original sales receipt to the distributor from whom the unit was purchased and your money will be promptly refunded. Refund do not include shipment costs. You can also request the exchange of your broken (not properly working unit) with new one. This warranty applies only during normal use and care and is absolutely void if the product is misused, neglected, damaged, altered, or repaired by someone other than Dimax.